Installing The Lan Driver - Fujitsu PRIMERGY BX620 S4 User Manual

4.3 Installing the LAN Driver

This section explains the procedure for installing the driver.
For the latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

4.3.1 Installing the LAN Driver

Perform the following procedures to install the LAN driver. The procedures are the same for the full
installation and the Server Core installation.
For Windows Server 2008 (32-bit)
For Onboard LAN
1
Insert the PRIMERGY Startup Disc.
2
Execute the following file.
\DRIVERS\LAN\Broadcom\Onboard\w2k8\setup.exe
3
Click [Next].
4
Select [I accept the license agreement] and click [Next].
5
Click [Install].
Driver installation starts.
6
Click [Finish].
7
Eject the PRIMERGY Startup Disc and restart the Server Blade.
For Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp (PG-2861L)
1
Insert the PRIMERGY Startup Disc.
2
Execute the following file.
\DRIVERS\LAN\Intel\APPS\PROSETDX\Vista32\DxSetup.exe
The message "Welcome to InstallShield Wizard for Intel
Proceed with the installation by following the instructions displayed in the window.
Also, only check the following for program functions to be installed on the [Setup Options]
window. For Server Core system, only drivers can be installed.
• Driver
PRIMERGY BX620 S4 Server Blade User's Guide
®
Network Connection" is displayed.
89