Jumbo Frame - Fujitsu PRIMERGY BX620 S4 User Manual

Chapter 5 Operations after OS Installation

5.7.6 Jumbo Frame

For Windows Server 2008
Gigabit Ethernet supports Jumbo Frame. When using Jumbo frame, construct the Jumbo frame network
using only devices that support Jumbo frame, and apply the settings that will enable Jumbo frame.
Configure setting for Jumbo frame according to the following procedures.
1
Log on to the Server Blade with administrator privileges.
2
Click [Start] – [Administrative Tools] – [Computer Management], select [Device
Manager], and then double-click Network Adapter.
3
Double-click the LAN adapter to be set, and click the [Advanced] tab.
4
Specify the value to be used for [Jumbo Packets].
5
Click [OK] to exit Intel
6
Restart the Server Blade.
For Windows Server 2003
1
Log on to the Server Blade with administrator privileges.
2
Click [Start] – [Settings] – [Control Panel] – [Intel
®
Intel PROSet.
3
Select a LAN adapter to perform configuration and click the [Advanced] tab.
4
Set to the required value in [Jumbo Frame].
5
Click [OK] to exit Intel
6
Restart the Server Blade.
162
®
PROSet.
®
PROSet.
®
PROSet Wired], and start