Fujitsu PRIMERGY BX620 S4 User Manual page 38

Chapter 2 Checking before OS Installation
When installing Windows Server 2008 (64-bit) using ServerStart
When installing Windows Server 2008 (64-bit) using ServerStart, and when saving the configuration file
to a floppy disk, the boot priority must be changed as follows using the BIOS Setup Utility at ServerStart
startup.
If the boot priority is not changed, the automatic installation stops in the middle. Make sure to change
it.
1
Turn the Server Blade on, and start the BIOS Setup Utility.
"8.2.1 Starting and Exiting the BIOS Setup Utility" (pg.205)
2
Select the [Main] menu – [Boot] submenu, and press the [Enter] key.
The [Boot Settings] window appears.
3
Select [Boot Device Priority], and press the [Enter] key.
The [Boot Device Priority] submenu appears.
4
Set the Boot device to put [Hard Disk Drives] before [Removable Drives].
Set it as follows.
[Removable Drives] and [CD/DVD Drives] are displayed when connecting the USB device.
1 CD/DVD Drives
2 Hard Disk Drives
3 Removable Drives
5
Exit the BIOS Setup Utility, and turn the server's power off.
38