4.3 Installing the LAN Driver
This section explains the procedure for installing the driver.
In addition to the case where the OS is installed manually, the driver must be installed
when a LAN card is added.
4.3.1 Installing the LAN Driver (Windows Server 2003 x64)
LAN cards except PG-2861 are recognized as the network adapters when the OS is installed.
■
Perform "
Updating the LAN Cards" ( pg.133) on all LAN device names under [Network adapters] ,
■
and then perform "
devices].
For the following LAN cards, the network adapters are recognized when the cards are mounted during
OS installation.
• PG-1852
• PG-1892
■ Updating the LAN Cards
Perform the following procedures on all LAN device names under [Network adapters] in [Device
Manager].
1
Click [Start] → [Administrative Tools] → [Computer Manager].
2
Click [Device Manager].
3
Double-click a LAN device name under [Network adapters].
Names of the LAN devices are displayed as follows.
Onboard LAN (1000BASE-T)
PG-1852
PG-1892
4
Insert the driver disk created from the ServerStart CD-ROM into the server.
5
Click [Update Driver] in the [Driver] tab window.
The "Welcome to the Hardware Update Wizard" window appears.
6
Check [No, not this time] and click [Next].
Installing the LAN Driver" ( pg.134) on the ethernet controllers under [Other
LAN cards
PRIMERGY TX150 S4 User's Guide
table: LAN device name
LAN device name
Broadcom NetXtreme Gigabit Ethernet
Intel(R) PRO/1000 MT Desktop Adapter
Intel(R) PRO/1000 MT Server Adapter
4
133