Bios Setup Utility; Starting And Exiting The Bios Setup Utility - Fujitsu PRIMERGY BX620 S4 User Manual

8.2 BIOS Setup Utility

This section explains settings for the BIOS Setup Utility and items regarding each
setting.

8.2.1 Starting and Exiting the BIOS Setup Utility

The following explains how to start and exit the BIOS Setup Utility.
How to start the BIOS Setup Utility
1
Turn on the main power of the Chassis.
→ "3.2 Turning On the Server" in "BX600 S3 Blade Server System Unit Hardware Guide"
2
Turn the Server Blade on.
→ "3.2 Turning On the Server" in "BX600 S3 Blade Server System Unit Hardware Guide"
3
After the memory capacity is displayed, if "Press F2 to run Setup Press F12 for
BBS POPUP" appears on the screen, press the [F2] key.
The [Main] menu appears.
Main
System Overview
AMIBIOS
Version
Build Date
BIOS Version
BMC F/W Version
System Time
System Date
Sync RTC with Mgmt. Blade
System Memory
Size
v0n.nn (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced Security Server
08.00.12
mm/dd/yy
nnnn
nnnn
[hh:mm:ss]
[xxx mm/dd/yyyy]
[Enabled]
3072MB
PRIMERGY BX620 S4 Server Blade User's Guide
Boot Exit
Use [ENTER],[TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
Select Screen
Select Item
+- Change Option
Tab Select Field
F1 General Help
F10 Save and Exit
Esc Exit
205