Lan Driver Advanced Setup [Bacs]; Bacs Installation - Fujitsu PRIMERGY BX620 S4 User Manual

5.6 LAN Driver Advanced Setup
[BACS]
BACS is an integrated GUI application consisting of programs such as BASP
(Broadcom Advanced Server Program) that provides the load balancing feature, etc.,
by teaming up multiple adapters.
BACS is used in the following situations:
• Create a Team using an onboard LAN and 1Gbit/s Ethernet I/O Module (PG-
LND201)
• Perform advanced setup for an onboard LAN and 1Gbit/s Ethernet I/O Module
(PG-LND201)
Use of Intel® PROSet
®
Use Intel PROSet ( pg.151) to perform the following setup for LAN cards (PG-2861L)
• Use the Teaming function between LAN cards (PG-2861L)
• Setup a VLAN using LAN cards (PG-2861L)
• Use the Jumbo frame using LAN cards (PG-2861L)
• Perform other advanced settings for LAN cards (PG-2861L)

5.6.1 BACS Installation

If [Broadcom Control Suite 2] or [Broadcom Control Suite 3] is not displayed in the [Control Panel],
install BACS according to the following installation procedures:
For Windows Server 2008
1
Execute the following file contained in the PRIMERGY Startup Disc.
For Windows Server 2008 (32-bit)
[CD/DVD drive]: \DRIVERS\LAN\Broadcom\Onboard\MgmtApps\w2k8\setup.exe
For Windows Server 2008 (64-bit)
[CD/DVD drive]: \DRIVERS\LAN\Broadcom\Onboard\MgmtApps\w2k8x64\setup.exe
The installer starts up.
2
Click [Next].
License agreement window appears.
3
Select [I accept the terms in the license agreement] and click [Next].
Custom Set up window appears.
4
Check that [Control Suite] and [BASP] are selected, and click [Next].
Proceed with the installation by following the instructions in the window.
PRIMERGY BX620 S4 Server Blade User's Guide
123