Fujitsu PRIMERGY BX620 S4 User Manual page 81

6
Click [Next].
Continue the installation procedure according to the setup window.
The OS selection window appears.
7
Select the OS to be installed.
Select "Windows Server 2008 Standard (Server Core installation)".
The license agreement window appears.
8
After reading through its contents, check [Accept] and click [Next].
OS installation is automatically performed by the setup program (reboot will occur a few times).
9
Set a password for the Administrator.
Click "Other Users" when it is displayed.
The user ID and password entry window appears. Enter "Administrator" as the ID, leave
password empty and click [→].
The window where the password can be changed appears.
10
Install SNMP service.
1. Execute the following command (case-sensitive).
>start /w ocsetup SNMP-SC
2. Execute the following command to check that SNMP is installed properly.
>oclist | findstr SNMP
When the following message is displayed, it is installed properly.
Installed: SNMP-SC
PRIMERGY BX620 S4 Server Blade User's Guide
81