Fujitsu PRIMERGY BX620 S4 User Manual page 49

3
Insert the ServerStart floppy disk. Make sure that "on local drive (floppy/USB
stick)" and "A:" are selected and click [Continue].
Set the ServerStart floppy disk in the write-enabled state.
When installing the OS without using the ServerStart floppy disk, select [No status backup],
and click [Next]. [No status backup] cannot be selected in the following cases.
•When configuring RAID using ServerStart
•When installing Windows Server 2003 x64
•When installing Windows Server 2008
The [Initialization of ServerStart core running] window appears and the ServerStart initialization
process starts. Depending on hardware configuration, this process may take a few minutes. After
completion, the license agreement window appears.
PRIMERGY BX620 S4 Server Blade User's Guide
49