Fujitsu PRIMERGY BX620 S4 User Manual page 179

7
Release the socket lever and the CPU fastener.
1. Unhook the socket lever, and pull it up carefully.
2. Press the CPU fastener tab with an index finger to open the CPU fastener.
Be careful not to touch the CPU socket pin, etc.
Socket lever
• When opening the CPU fastener, be careful not to bend any pins in the CPU
socket. Doing so may cause failures.
8
Install the CPU.
1. Remove the cover attached to the CPU.
2. Check the marking (small triangle) on the CPU and on the CPU socket.
3. Hold the parts shown in ellipses on the CPU in the following figure, and align the
markings and carefully insert the CPU.
Hold these parts
• Do not touch the CPU electrode. Doing so may cause a failure.
• When installing the CPU in the socket, be careful not to bend any pins in the
CPU socket.
PRIMERGY BX620 S4 Server Blade User's Guide
(1)
After pulling up the CPU fastener,
open it from this part being careful
not to touch other parts.
CPU fastener
Tab
(2)
Marking
179