Fujitsu PRIMERGY BX620 S4 User Manual page 159

4
Specify [VLAN ID] and [VLAN Name]. Then click [OK].
The [VLAN ID] should be identical to the switch setting. 1 to 4094 can be specified.
Any name can be specified as the [VLAN Name].
5
Click [OK] to close the property window for the LAN adapter.
When setup of the VLAN is complete, the following virtual adapter will be created.
• "(LAN Adapter Name)-VLAN:(VLAN Name)"
Upper protocols will be bound with the main virtual adapter. They cannot be bound with the LAN
card configuring a VLAN. The IP address should be specified in the main virtual adapter.
Deleting a VLAN
Follow the steps below to delete a VLAN.
1
Log on to the Server Blade with administrator privileges.
2
Click [Start] – [Settings] – [Control Panel] – [Intel
Connections] to start Intel
3
Select the VLAN to be deleted and click it.
4
Click [Delete VLAN].
The confirmation message appears.
5
Click [OK].
When an attempt is made to delete the last VLAN, the message will be displayed. Click [OK].
6
Click [OK] to exit Intel
7
Restart the Server Blade.
For Windows Server 2003
Creating a VLAN
Follow the steps below to create a VLAN.
1
Log on to the Server Blade with administrator privileges.
2
Set the port of the Switch Blade connected to each LAN port or the port of an
external switching hub, so that a VLAN tag frame can be transferred.
3
Click [Start] – [Settings] – [Control Panel] – [Intel
®
Intel PROSet.
PRIMERGY BX620 S4 Server Blade User's Guide
®
PROSet.
®
PROSet.
®
PROSet for Wired
®
PROSet Wired], and start
159