Installation Modes Of Serverstart - Fujitsu PRIMERGY BX620 S4 User Manual

2.2.2 Installation Modes of ServerStart

Quick installation mode
This mode completes the OS installation by executing plain settings. Select this mode when you want to
install the OS quickly and simply.
When installing Windows Server 2008 in Quick installation mode, perform full installation.
To install while maintaining the established RAID environment, the quick installation mode must be
selected to install the OS.
Select [Logical Disk0] in the [Select the Boot Controller and Boot Disk] window and install the OS.
Expert mode
In this mode, start up Disk Manager and format the partition where your OS is installed prior to
installation of the OS. Select the expert mode only when installing the OS while maintaining the existing
partitions.
Windows Server 2008 cannot be installed in Expert mode.
Also, when using ServerStart while maintaining the existing partitions, start up Disk Manager, format an
installation partition and install the OS.
PRIMERGY BX620 S4 Server Blade User's Guide
41