Fujitsu PRIMERGY BX620 S4 User Manual page 132

Chapter 5 Operations after OS Installation
1. Enter values for the following setting items, and click [Edit Target IP Address...].
• Probe interval (seconds)
Specify the probe interval (seconds) between 1 to 60.
• Probe maximum retries
Specify the Probe maximum retries between 1 to 10.
• Probe VLAN ID
When setting tag VLAN for probe of LiveLink, specify the value between 0 to 4096.
The following window appears.
2. Specify the Target IP address, and click [OK].
Returns to the [Configure LiveLink(TM) attributes] window.
3. Click [Next].
The [Configure the IP address for each team member] window appears.
4. Select the team member to specify the IP address on the [Team Members] list.
132
Entering an IP address for Target1 is required. Up to four Targets can be specified.