Fujitsu PRIMERGY BX620 S4 User Manual page 67

4
When a message prompts you to insert the OS CD/DVD, insert the CD/DVD
and click [OK].
For Windows Server 2003 / Windows Server 2003 x64
1. Insert the OS CD/DVD (Installation disc).
The license agreement window appears.
2. Click [I agree].
After files are copied, a message prompts you to eject the CD/DVD and floppy disk.
For Windows Server 2003 R2 / Windows Server 2003 R2 x64
1. Insert the OS CD/DVD (Installation disc) Disc 1.
The license agreement window appears.
2. Click [I agree].
After files are copied, a message prompts you to insert the Disc 2.
3. Insert the Disc 2 of OS CD/DVD (Installation disc).
After files are copied, a message prompts you to eject the CD/DVD and floppy disk.
5
Eject the CD/DVD and floppy disk and click [OK].
The system is restarted. The system continues the installation operation after restart.
Setup of OS GUI and installation of LAN utility, Service Pack, and Active Directory are
performed automatically.
6
When a confirmation message to restart appears, click [Restart].
The system restarts and installs high reliability tools.
Thus the Command Prompt windows may appear and disappear during installation of
ServerView, the installation process is properly proceeding.
7
Press the [Enter] key when a message notifies completion of installation.
8
Restart the system.
Click [Start] – [Shutdown] to restart the system.
After restarting, enter the specified password to login.
9
Perform settings for the RAID management tool (ServerView RAID).
For details, refer to the manual in the Array Controller Document & Tool CD.
For the manual of the SAS RAID Ctrl to be used, refer to "2.3.2 Notes on Configuring RAID"
( pg.42).
• Setting an array administrator account
A Windows user account is required when using ServerView RAID. Create the group "raid-
adm", and create an account with any name for an array administrator in this group.
• Setting the HDD check scheduler
When using the SAS RAID Ctrl (MegaRAID SAS), change the settings for the HDD check
scheduler according to the operation that is required. It is set to 12:00 everyday as default.
10
Perform settings for ServerView.
Refer to "2.4 Checking after Installation" in "ServerView User's Guide" to perform the necessary
settings.
PRIMERGY BX620 S4 Server Blade User's Guide
67