Fujitsu PRIMERGY BX620 S4 User Manual page 87

6
Install the Drivers for onboard array controller manually.
1. When the following message appears, press the [S] key.
To specify additional SCSI adapters, CD-ROM drives, or special disk
controllers for use with Windows, including those for which you
have a device support disk from a mass storage device manufacturer,
press S.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created and press the
[Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press
ESC to return to the
previous screen.
3. Select following item and press the [Enter] key.
LSI Logic Fusion-MPT SAS Driver(Server 2003 32-bit)
4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the Windows default
driver.
5. Follow the instructions in the window to perform installation
The message which prompts you to set the floppy disk appears during the installation, set
the driver disk and push the [Enter] key.
7
Follow the instructions from the setup program to continue the installation
procedures.
If a message indicating that the driver has failed in the Windows logo test for validating the
compatibility with Windows appears, select [Yes] to continue the installation procedure.
8
Apply Windows Server 2003 Service Pack.
For details, refer to the description in the window.
9
Install the ChipSet driver.
1. Insert the PRIMERGY Startup Disc into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the CD/DVD.
[CD/DVD drive]: \DRIVERS\ChipSet\Intel\5000P\infinst_autol.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the "InstallShield
PRIMERGY Startup Disc from the CD/DVD drive and click [Finish] to restart the
system.
PRIMERGY BX620 S4 Server Blade User's Guide
®
wizard has completed" message appears, eject the
87