Installing Network Blades; Installing/Removing Lan Network Blades - Fujitsu PRIMERGY BX600 S3 Hardware Manual

Chapter 4 Installing Options

4.3 Installing Network Blades

This section explains how to install/remove Network Blades. For this server, even
when the power supply of the Chassis is turned on it is possible to install/remove
(hot-swap/hot-plug) Network Blades.
For Network Blades not shown in this manual, refer to each Network Blade manual.

4.3.1 Installing/Removing LAN Network Blades

This section explains how to install/remove LAN Network Blades.
For more details about the various blades, refer to the Network Blade manuals.
■ Before installing
●
Notes when installing and removing
Network Blades can be installed/removed when the main power of the Chassis is turned on.
• When removing the LAN Network Blades or dummy Switch Blade, do not insert your hand
into the Network Blade slot. Doing so may cause electric shock.
• When installing a LAN Network Blade, make sure that it is inserted completely in the slot
before setting the handle.
If the Server Blade connected to a LAN Network Blade is operating, disconnecting the LAN Network
Blade will cause LAN connection to be lost.
42