Fujitsu PRIMERGY BX620 S4 User Manual page 219

Item
Boot Retry Counter
ASR&R Boot Delay
(Minute)
After Power Failure
PRIMERGY BX620 S4 Server Blade User's Guide
table: Items on the ASR&R Submenu
Setting
• No Retry
• Retry1 time
• Retry2 times
• Retry3 times
(Initial value)
• Retry4 times
• Retry5 times
• Retry6 times
• Retry7 times
2 (Unchangeable)
• Stay Off
• Last State (Initial value)
• Power On
Description
Sets the maximum number of retries to boot the
operating system within the range of 0 to 7.
Sets the standby time for startup after shutdown due
to trouble (such as overheating) in minutes. The
system restarts after the set standby time.
Sets the server operation when power supply is
restored after power failure or turning on the main
power of the Chassis.
• Stay Off
The power stays turned off.
• Last State
The power state before the power failure is
restored.
• Power On
The power is turned on.
Note:
When a UPS scheduled operation is
performed in an OS such as Windows
Server 2003 and Linux, in which the power
turns off after shutdown, set this item to
[Power On]. If this is not set to [Power On],
the server will not start up automatically at
the specified time.
219