Creating Maintenance Tools; Installing Serverstart - Fujitsu PRIMERGY BX620 S4 User Manual

5.4 Creating Maintenance Tools

This section explains how to create tools for maintaining the server.
Maintenance tools are created with the FloppyBuilder function of ServerStart.
With the FloppyBuilder function of ServerStart, you can create the following tools:
• "Server Management Tools" disk
• DOS floppy disks
The FloppyBuilder can be used under environments such as:
• the ServerStart system started on a client computer (recommended)
• the system started on the server using the PRIMERGY Startup Disc
When creating the tools on a client computer, install ServerStart on the computer beforehand.
If ServerStart of a different version is installed in the computer, make sure to uninstall the ServerStart.
Then perform installation again. For details on how to uninstall ServerStart, refer to "
ServerStart" ( pg.115).

5.4.1 Installing ServerStart

Install ServerStart on a client computer when creating a drive disk using FloppyBuilder function.
System requirements for client computers
Client computers must satisfy the following requirements.
Hardware Personal computers operated with Windows Vista or Windows XP Professional
(A DVD drive and minimum 10MB free disk space are required.)
Software Microsoft® Internet Explorer 5.5 or later
Using ServerStart on the server
ServerStart can be installed to the server, Windows Server 2008 (32-bit) or Windows Server 2003
employed. Install ServerStart in accordance with this chapter.
Note that ServerStart is not available to the server where Windows Server 2008 (64-bit) or Windows
Server 2003 x64 is installed.
1
Insert the PRIMERGY Startup Disc into the client computer.
The [PRIMERGY Startup Disc] window appears.
PRIMERGY BX620 S4 Server Blade User's Guide
Uninstalling
113