For Windows Server 2003 - Fujitsu PRIMERGY BX620 S4 User Manual

Chapter 4 Manual OS Installation

4.4.2 For Windows Server 2003

1
Click [Start] – [Programs] – [Administrative Tools] – [Computer Management].
2
Click [Device Manager].
Two ports of the fibre channel, which is installed in the 2Gbit/s FC I/O Module, are displayed
with the names below.
• [Fibre Channel Controller] under [Other Devices]
• [QLogic Fibre Channel Adapter] under [SCSI and RAID controller]
Double-click these fibre channel controllers and perform the following Steps 3 to 12 on all
fibre channel ports.
3
Double-click the icon or name of the fibre channel controller.
The properties window appears.
4
Insert the PRIMERGY Startup Disc into the server.
5
Click the [Driver] tab and click [Update Driver].
The [Welcome to the Hardware Update Wizard] window appears.
6
Select [Install from the list or specified location] and click [Next].
7
Select [Not searching, and select installation driver], and click [Next].
8
Click [Have Disk].
9
Enter the following folder name in [Copy files from manufacture] and click [OK].
• Windows Server 2003 x64
[CD/DVD drive]: \DRIVERS\FCD\Qlogic\W2K3x64
• Windows Server 2003
[CD/DVD drive]: \DRIVERS\FCD\Qlogic\W2K3
10
Click [Next].
Driver installation starts.
11
Click [Finish].
Detected drivers are displayed.
12
Click [Exit].
96