Fujitsu PRIMERGY BX620 S4 User Manual page 196

Chapter 7 Installing Internal Options
6
Fix the expansion board using the screws supplied with the board.
7
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.174)
8
Install the Server Blade to the Chassis.
→ "4.2 Installing Server Blades/Storage Blades" in "BX600 S3 Blade Server System Unit
Hardware Guide"
9
Turn on the Server Blade and check the BIOS Setup Utility settings.
Referring to "7.8 BIOS Setting with Expansion Card Installed" ( pg.201), confirm whether the
setting satisfies card installation conditions. If the setting does not satisfy those installation
conditions, change the setting.
How to remove an expansion board
To remove an expansion board, simply reverse the installation procedures.
196
Screws
To connect the expansion board to a fibre channel device, install the Fibre Channel expansion
board in the Server Blade and the FC Network Blade in the Chassis, then install the SFP mod-
ule (option) in the FC Network Blade. For details, refer to "BX600 S3 Blade Server System Unit
Hardware Guide".