Installing An Expansion Card; Location Of Expansion Card Installation - Fujitsu PRIMERGY BX620 S4 User Manual

Chapter 7 Installing Internal Options

7.5 Installing an Expansion Card

This Server Blade can be equipped with one expansion card using the expansion
card slot module.
This section explains the types of expansion card, installation procedures, and notes
on expansion cards.

7.5.1 Location of Expansion Card Installation

Insert an expansion card in a PCI slot of the expansion card slot module, and then install the slot module
in the expansion card slot of the Server Blade.
[Server Blade (Front view)]
Expansion card slot
[Expansion card slot module]
188
• When installing or removing an expansion card, make sure to remove the
Server Blade from the Chassis. Failure to do so may cause electric shock.
For details on how to remove the Server Blade from the Chassis, refer to
"BX600 S3 Blade Server System Unit Hardware Guide".
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity. Before handling them, first touch a metal
part of the Chassis to discharge static electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
• Expansion cards are susceptible to static electricity. Place them on conductive
pads or keep them in their packaging as long as they are not necessary.
PCI slot