Main Menu - Fujitsu PRIMERGY BX620 S4 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.2 Main Menu

The [Main] menu window is initially displayed when you start the BIOS Setup Utility.
Settings for time and date and for the drives are configured in the [Main] menu window.
Main Advanced
System Overview
AMIBIOS
Version
Build Date
BIOS Version
BMC F/W Version
System Time
System Date
Sync RTC with Mgmt. Blade
System Memory
Size
v0n.nn (C)Copyright 1985-2004, American Megatrends, Inc.
Item
Version
Build Date
BIOS Version
BMC F/W Version
System Time
System Date
Sync RTC with Mgmt.
Blade
System Memory Size
208
BIOS SETUP UTILITY
Security Server Boot Exit
08.00.12
mm/dd/yy
nnnn
nnnn
[hh:mm:ss]
[xxx mm/dd/yyyy]
[Enabled]
3072MB
table: Items on the Main Menu
Setting
-
-
-
-
Present time
Present date
• Disabled
• Enabled (Initial value)
-
Use [ENTER],[TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
Select Screen
Select Item
+- Change Option
Tab Select Field
F1 General Help
F10 Save and Exit
Esc Exit
Description
Displays the AMIBIOS version.
Displays the date that the AMIBIOS is built.
Displays the BIOS version of the Server Blade.
Displays the BMC firmware version of the Server
Blade.
The system time is set in "hours:minutes:seconds"
format. The hours should be based on a 24-hour
clock.
For example, 6:30:00 P.M. is set as "18", "30",
"00".
This can be set when [Sync RTC with Mgmt.
Blade] is set to [Disabled].
Note:
Repeat the procedure until the correct time
is set.
If a highly precise system time is necessary,
install a network synchronized time system
(NTP, etc.).
The system date is set in "month:day:year" format.
For example, April 20, 2008 is set as "04", "20",
"2008".
This can be set when [Sync RTC with Mgmt.
Blade] is set to [Disabled].
Sets whether or not to synchronize the time
between the Management Blade and RTC.
Displays the size of the installed memory.