Removing And Attaching The Top Cover; How To Remove The Top Cover - Fujitsu PRIMERGY BX620 S4 User Manual

Chapter 7 Installing Internal Options
7.2 Removing and Attaching the Top
Cover
This section explains how to remove and attach the top cover.

7.2.1 How to Remove the Top Cover

1
Turn off the server.
→"3.3 Turning Off the Server" in "BX600 S3 Blade Server System Unit Hardware Guide"
2
Touch a metal part of the Chassis to discharge static electricity.
3
Remove the target Server Blade from the Chassis.
→"4.2 Installing Server Blades/Storage Blades" in "BX600 S3 Blade Server System Unit
Hardware Guide"
4
While pressing the buttons, slide the top cover a little backward, and carefully
pull it up.
174
• When installing or removing the top cover, make sure to remove the Server
Blade from the Chassis. Failure to do so may cause electric shock.
For details on how to remove the Server Blade from the Chassis, refer to
"BX600 S3 Blade Server System Unit Hardware Guide".
• Use tip preventive stabilizers when installing the rack. Pulling the Server Blade
out of the rack without installing stabilizers may cause the rack to tip over.
Buttons