Fujitsu PRIMERGY BX620 S4 User Manual page 82

Chapter 4 Manual OS Installation
11
Install the LAN driver.
Install the LAN driver using the PRIMERGY Startup Disc. For details, refer to "4.3 Installing the
LAN Driver" ( pg.89).
12
Install the Fibre Channel Driver.
Install the Fibre Channel Driver using the PRIMERGY Startup Disc. For details, refer to "4.4
Installing the Fibre Channel Driver" ( pg.94).
13
Install the ServerView Agent.
For the procedure for installing, refer to "ServerView User's Guide (For Windows Agent)".
14
Perform settings for the RAID management tool (ServerView RAID).
For details, refer to the manual in the Array Controller Document & Tool CD.
For the manual of the SAS RAID Ctrl to be used, refer to "2.3.2 Notes on Configuring RAID"
( pg.42).
• Setting an array administrator account
A Windows user account is required when using ServerView RAID. Create the group "raid-
adm", and create an account with any name for an array administrator in this group.
• Setting the HDD check scheduler
When using the SAS RAID Ctrl (MegaRAID SAS), change the settings for the HDD check
scheduler according to the operation that is required. It is set to 12:00 everyday as default.
The installation of Windows Server 2008 Server Core is completed.
Before starting operation
After OS installation, refer to "Chapter 5 Operations after OS Installation" ( pg.99) and perform
necessary operations.
82
For Windows Server 2008 Server Core, ServerView Console and ServerView RemoteCon-
trolService cannot be installed. Another system is required for installation.