Configuration Utility Screens - HP ProLiant BL35p User Manual

The following messages can appear during the boot process:
•
Adapter removed from boot order!
This message displays when an adapter was removed from the system or was relocated behind a
PCI bridge.
•
Adapter configuration may have changed, reconfiguration is suggested!
This message displays when fewer than four adapters are in the boot order list and more adapters
exist than are shown.
The SAS BIOS configuration utility can detect devices that the SAS BIOS cannot control. (For example,
tape drives and scanners require their own specific drivers.) However, the configuration utility can still be
used to modify certain parameters for these devices.

Configuration utility screens

All SAS BIOS configuration utility screens contain the following areas, starting at the top of the screen:
Header—Identifies the utility and version number.
•
Menu—Displays the title of the current screen and also identifies the adapter on screens other than
•
the Adapter List screen.
Main area—The main area for presenting data. This area has a cursor for item selection, and
•
horizontal and vertical scroll bars if necessary.
Footer—Provides general help information text.
•
Adapter List screen
The Adapter List screen is the first screen to display when the SAS BIOS configuration utility opens. The
screen provides information about each adapter installed in the system.
If the host bus adapter is configured as the active boot controller in RBSU, the following actions are
possible:
Changing the position of an adapter in the boot order sequence by moving the cursor to the Boot
•
Order field of the adapter, and then pressing - or +.
Adding an adapter to the Boot Order list by moving the cursor to the Boot Order field of the
•
adapter, and then pressing Ins.
Configuration and utilities 37