Lint Filter; Loading Door - ALLIANCE AE9133 Service Manual

Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.

28. LINT FILTER

Refer to Figure 10
Open loading door and lift filter out of front air
duct.
IMPORTANT: When installing the filter, be sure to
place the filter into the front air duct with the word
"Front" facing the front of the dryer.

29. LOADING DOOR

Remove four screws holding hinges to door. Refer
to Figure 10.
LINT
FILTER
FRONT
AIR DUCT
Figure 10
26
HINGE
SCREWS
DRY1055S
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
WARNING
W001R1
60549