Volkswagen Fox 2004 Workshop Manual page 85

1.6.1 Removal
Note
Always replace seals and gaskets.
– Drain the cooling system
– Remove Poly-V belt
– Remove timing belt
– Loosen securing bolts -1- and carefully remove the pump -2-.
1.6.2 Installing
The installation is carried out in removal reverse order, consider‐
ing the following:
– Moisten new O-ring -3- with coolant.
– Insert the pump -2- into engine block and tighten securing bolts
-1-. Tightening torque: 15 Nm.
Note
The pump plug must face downwards.
– Install and adjust timing belt
– Install Poly-V belt ⇒ page 14
– Fill cooling system ⇒ page 76
⇒ page 76 .
⇒ page 14 .
⇒ page 41 .
⇒ page 41 .
.
.
3 - Cyl. diesel engine - Edition 02.2009
1. Cooling system components - remove and install
Fox 2004 ➤
81