Volkswagen Fox 2004 Workshop Manual page 115

– Slide Assembly sleeve -T10056/2- to stop position on unit in‐
jector.
– Slide intermediate ring carefully towards assembly sleeve and
into injector seat.
– Remove assembly sleeve.
– Slide Assembly sleeve -T10056/3- to stop position on unit in‐
jector.
– Slide lower ring carefully towards assembly sleeve and into
injector seat.
– Remove assembly sleeve.
– Install the heat insulation cover with the fastening clip.
3 - Cyl. diesel engine - Edition 02.2009
1. Maintaining the direct injection Diesel system
Fox 2004 ➤
111