Volkswagen Fox 2004 Workshop Manual page 46

Fox 2004 ➤
3 - Cyl. diesel engine - Edition 02.2009
1.1.1 Removal
Note
Adjustment work on timing belts should only be carried out on cold
engines, as the indicator on the tensioning element changes de‐
pending on the engine temperature.
– Remove the engine cover.
– Remove the hose between intercooler and intake connecting
flange.
– Fit Support bracket -10-222 A- as shown and support the en‐
gine in its installation position.
– Remove engine support -1- and engine console -2-.
– Remove Poly-V belt ⇒ page 14
– Remove Locking pin -T10060- from tensioning element.
– Remove mechanical distribution upper cover.
– Remove lower noise insulation from engine ⇒ Rep. Gr. 50 .
– Remove the hose between turbocharger and intercooler.
– Carefully cover or seal open ends.
– Remove vibration absorber.
– Remove centre cover of the mechanical distribution.
– Remove mechanical distribution lower cover.
– Rotate the crankshaft to TDC for cylinder 1.
42
Rep. Gr.15 - Cylinder head, valve control mechanism
.