Overcharge - Turbo; Overcharge System With Turbocharger; Safety Measures; Cleanliness Rules - Volkswagen Fox 2004 Workshop Manual

21 –

Overcharge - turbo

1 Overcharge system with turbocharg‐
er
1.1

Safety measures

WARNING
During assembly work, especially within the engine compart‐
ment, due to the lack of space, bear in mind the following :
♦ All hoses (e.g. fuel, hydraulics, activated charcoal filter
system, cooling system and cooling gas, brake fluid, vac‐
uum) and electric cables must be restored to original
positions.
♦ To provide easy access to all the moving or hot parts.
If during a test drive it is necessary to use test and measuring
equipment, observe the following:
♦ Always install test and measuring equipment on the back seat
to be operated by someone from there.
If test and measuring equipment are operated from the passenger
seat, the person seated there may be injured should the airbag
activate in case of accident.
1.2

Cleanliness rules

When working on the overcharge system, pay careful attention to
the following cleanliness rules :
♦ Carefully clean all the connections and surrounding areas be‐
fore disconnecting them.
♦ Place all the parts removed on clean surface and cover them.
Do not use cloth that releases lint!
♦ If repair work is not going to be carried out immediately, open
components should be covered up or carefully preserved.
♦ Install only clean components. Only remove spare parts from
packaging just prior to installing them. Do not install compo‐
nents that have been kept out of packaging (i.e. inside the tool
box, etc.).
♦ During repair services, remove oil from hose connections and
ends.
♦ With system open: If possible, avoid using compressed air. If
possible, do not move the vehicle.
1.3

Turbocharger - remove and install

Follow safety measures
Follow cleanliness rules
⇒ page 101 .
⇒ page 101 .
3 - Cyl. diesel engine - Edition 02.2009

1. Overcharge system with turbocharger

Fox 2004 ➤
101