Volkswagen Fox 2004 Workshop Manual page 28

Fox 2004 ➤
3 - Cyl. diesel engine - Edition 02.2009
❑ Check it is securely seated.
❑ Lubricate lightly when fitting.
11 - 20 Nm
12 - Oil pump
❑ With 11.5-bar pressure relief valve.
❑ Before installing, check that both centering fastening sleeves are installed.
13 - Counterbalance shaft
❑ Remove and install
14 - Mounting frame
❑ Before installing, check that the securing guides for centralizing in the engine block are in their positions,
and the sealing ring is inserted in the mounting frame.
❑ Remove and install
15 - Sealing ring
❑ Replace.
❑ Check that it is firmly seated on the mounting frame.
16 - Engine block
17 - Gear
18 - 20 Nm
19 - Chain tensioning element with tensioning plate.
❑ To remove, immobilise with Locking pin -T10060- .
❑ Remove and install
20 - 8 Nm + 90°
❑ Replace after each removal.
24
Rep. Gr.13 - Crankshaft, pistons
⇒ page 25 .
⇒ page 25 .
⇒ page 25 .