Volkswagen Fox 2004 Workshop Manual page 14

Fox 2004 ➤
3 - Cyl. diesel engine - Edition 02.2009
I ⇒ page 10
II ⇒ page 11
III ⇒ page 12
Part I
1 - Timing belt guard - upper
part
2 - Timing belt
❑ Mark rotation direction
before removal.
❑ Check wear.
❑ Do not bend.
❑ Remove, install, and ad‐
just ⇒ page 41 .
3 - 20 Nm +45°
❑ Replace after each
remova.l
4 - Timing belt tension pulley
5 - 100 Nm
6 - 25 Nm
7 - Camshaft gear
8 - Pulley
❑ Engine speed sensor.
❑ Immobilise with Coun‐
ter-hold tool -T10051- to
loosen or tighten.
❑ To remove, use Extrac‐
tor -T10052- .
❑ Remove and install
⇒ page 58 .
9 - 10 Nm
10 - Mechanical distribution
rear cover
11 - Sealing ring
❑ Replace if damaged.
12 - Pulley
13 - Water pump
❑ Remove and install
14 - Crankshaft gear
15 - 120 Nm + 90°
❑ Replace after each removal..
❑ Immobilise with Lock -3415- to loosen or tighten.
❑ Do not apply additional oil or grease to the threads and recess/flanges.
❑ The angular torque can be performed in several stages.
10
Rep. Gr.13 - Crankshaft, pistons
⇒ page 80 .