Fox 2004 ➤
3 - Cyl. diesel engine - Edition 02.2009
19 –
Cooling system
1
Cooling system components - re‐
move and install
Note
The cooling system is under pressure when the engine is hot.
♦
Thus, it is necessary to reduce the pressure before doing re‐
pairs.
♦
Hose junctions are fastened by spring clamps. When doing
repairs, use spring clamps only.
To install spring clamps, we recommend using Standart-type
♦
clamp pliers -VAS 5024A - or Hose clip pliers -VAG 1921- .
Check the cooling system tightness with the Engine cooling sys‐
tem tester -VAG 1274- and the Adapter for VAG 1274 -VAG
1274/8- and the Adapter for VAG 1274 -VAG 1274/9- .
Cooling system components in the body
Cooling system components in the engine
Cooling system - drain and replenish
Coolant mixture proportions
72
Rep. Gr.19 - Cooling system
⇒ page 73
⇒ page 74
⇒ page 76
.
⇒ page 76
.
.
.