Volkswagen Fox 2004 Workshop Manual page 44

Fox 2004 ➤
3 - Cyl. diesel engine - Edition 02.2009
36 - Tensioning element
37 - 20 Nm +45°
❑ Replace after each removal
Check the cylinder head for bending.
Max. permissible bending: 0.1 mm.
Note
Diesel engine head rework is not permitted.
Identification of cylinder head gasket
♦ Part number = -arrow 1-.
♦ Production control code = -arrow 2- (can be disregarded).
♦ Holes = -arrow 3-.
Note
Different cylinder head gasket thicknesses are mounted, depend‐
ing on the piston projection. When replacing the cylinder head
gasket, install a new part with the same identification.
40
Rep. Gr.15 - Cylinder head, valve control mechanism