Fox 2004 ➤
3 - Cyl. diesel engine - Edition 02.2009
28 –
Chamber pre-heating system
1
Chamber pre-heating system - check
Special tools and workshop equipment required
♦ Portable multimeter -VAG 1526C-
♦ Auxiliary measuring cable set -VAG 1594C-
Test conditions:
•
Battery voltage at least 11.5 V
•
Ignition switched off.
•
Direct injection diesel system command unit -J248- OK.
•
Fuse 4 (30) in the fuse-holder -S176- , Fuse 5 (30) in the fuse-
holder -S177- and Fuse 6 (30) the fuse-holder -S178- of the
battery OK.
Test sequence
– Remove the connector of the coolant temperature sensor.
122
Rep. Gr.28 - Chamber pre-heating system