Volkswagen Fox 2004 Workshop Manual page 68

Fox 2004 ➤
3 - Cyl. diesel engine - Edition 02.2009
32 - 20 Nm
33 - Gear
34 - 8 Nm + 90°
❑ Replace after each removal.
35 - Chain tensioning element with tensioning plate.
❑ To remove, immobilise with Locking pin -T10060- .
❑ Remove and install
36 - Sealing ring
❑ Not applicable.
37 - Oil level and temperature sensor -(G266)-
❑ Not applicable.
Part II
WARNING
Always replace self-locking nuts and screws subject to angular
torque
1 - Packing
❑ Replace.
2 - 15 Nm + 90°
❑ Replace after each re‐
moval.
❑ First, fit upper left and
lower right bolts; then,
tighten the four bolts di‐
agonally.
3 - Oil filter bracket
4 - Packing
❑ Replace.
5 - Connection, 25 Nm
❑ To the turbocharger oil
supply tube.
6 - Oil supply tube
❑ For the turbocompres‐
sor.
❑ Remove and install
⇒ page 65 .
7 - Oil pressure switch -F1- 0.7
bar, 20 Nm
❑ In case of leakage, cut
and replace the sealing
ring.
❑ Checking ⇒ page 70
8 - Sealing cap, 25 Nm
9 - Sealing ring
❑ Replace.
64
Rep. Gr.17 - Lubrication system
⇒ page 23 .
.