Volkswagen Fox 2004 Workshop Manual page 19

– Turn tensioning element in arrow direction to relieve tension
on Poly-V belt.
– Lock tensioning element with Retaining pin -T10060A- .
– Remove Poly-V belt.
1.1.2 Installation
– The installation is carried out by inverting the removal se‐
quence.
Note
Make sure before installing Poly-V belt that all the ancillaries
♦
(alternator, air conditioning compressor) are tightlysecured .
When fitting Poly-V belt, observe the direction in which it func‐
♦
tions and check it is seated correctly on the pulley.
In vehicles without air conditioning, installation of Poly-V belt
♦
on the alternador must be the last step.
In vehicles with air conditioning, installation of Poly-V belt last
♦
on the air conditioning compressor.
When the job is finished, always:
– Start the engine and check belt movement.
Belt path for vehicles without air conditioning.
3 - Cyl. diesel engine - Edition 02.2009
1. Engine - dismantle and assemble
Fox 2004 ➤
15