Volkswagen Fox 2004 Workshop Manual page 15

16 - 15 Nm
17 - 20 Nm
18 - Lower part of mechanical distribution cover
19 - Vibration cushioning pulley
❑ It can be installed in one position only. The holes are displaced.
20 - 10 Nm + 90°
❑ Replace after each removal.
21 - Timing belt guard - centre part
Part II
1 - Cylinder head cover
❑ With oil filler nozzle.
❑ Replace oil filling nozzle
if cylinder head cover is
damaged.
❑ Before installation,
carefully clean the cylin‐
der head sealing sur‐
face with a clean cloth.
2 - To turbocharger
3 - 10 Nm
❑ First, hand tighten all
bolts.
❑ Then, tighten both top
and remaining bolts
from the inside out, di‐
agonally, to specified
tightening torque.
4 - Pressure regulating valve
❑ To crankcase vent.
5 - Cover
❑ Replace seal if dam‐
aged.
6 - Gasket
❑ Replace if damaged.
7 - Oil filling nozzle
❑ Replace.
8 - Engine and gearbox sup‐
port
❑ With fuel tube.
9 - Cylinder head cover gasket
❑ Replace if damaged.
10 - 20 Nm
11 - Lifting eye
12 - 10 Nm
13 - Central connector
❑ To injector
14 - From servo brake
3 - Cyl. diesel engine - Edition 02.2009
1. Engine - dismantle and assemble
Fox 2004 ➤
11