Volkswagen Fox 2004 Workshop Manual page 16

Fox 2004 ➤
3 - Cyl. diesel engine - Edition 02.2009
15 - Tandem pump
❑ For supplying fuel and vacuum.
❑ Remove and install
❑ Check ⇒ page 95
16 - 25 Nm
17 - Supply hose
❑ From fuel filter ⇒ Item 1 (page 87)
❑ White or with white marking.
❑ Check that it is securely installed.
❑ Fasten with spring braces.
18 - Return hose
❑ To fuel filter ⇒ Item 1 (page 87)
❑ Blue or blue marked.
❑ Check that it is securely installed.
❑ Fasten with spring braces.
19 - Gasket
❑ Replace.
20 - Pin 10 Nm
❑ To engine cover.
21 - Engine and gearbox support
22 - Hexagonal nut
23 - Cylinder head gasket
❑ Replace.
❑ Observe identification
❑ When replacing, use completely new coolant.
24 - Hall Sensor -G40-
❑ To the camshaft position.
❑ Loosen to remove sealing ring from the mechanical distribution rear cover.
25 - Cylinder head securing bolt
❑ Replace.
❑ Follow the installation and removal sequence
❑ Insert washers into cylinder head before installing.
26 - Injectors
❑ Remove and install
Part III
WARNING
Always replace self-locking nuts and screws subject to angular
torque
12
Rep. Gr.13 - Crankshaft, pistons
⇒ page 97 .
.
.
.
⇒ page 35 .
⇒ page 112 .
⇒ page 46 .