Volkswagen Fox 2004 Workshop Manual page 61

– Fit the Device -2036- and adjust to height of plates.
– Remove valve springs with Lever -VW 541/1A- and Support‐
ing piece -VW 541/5- .
Note
Valves then will lean against piston head.
– Pull off valve stem seals with Puller -3047 A- .
2.3.2 Installing
– Install the plastic sleeve -A- supplied in the respective valve
stem. This will prevent the new valve stem -B- from being
damaged.
– Insert the new valve stem seal in the Fitter -3129- .
– Lubricate the seal lip at valve stem and tighten it carefully on
the valve guide.
3 - Cyl. diesel engine - Edition 02.2009
2. Valve command - repair
Fox 2004 ➤
57