Registration Details - Cisco TelePresence Administrator's Manual

Video communication server
Hide thumbs Also See for TelePresence:
Table of Contents

Advertisement

Field
Description
E164
For H.323 devices that registered one or more E.164 numbers, the first will be shown here. For SIP
devices this will always be blank because they cannot register E.164 numbers.
Type
Indicates the nature of the registration. This will most commonly be Endpoint, Gateway, or SIP UA.
Protocol Indicates whether the registration was for a SIP or H.323 device.
Creation
The date and time at which the registration was accepted.
time
If an NTP server has not been configured, this will say Time not set.
End
The date and time at which the registration was terminated.
time
Duration The length of time that the registration was in place.
Peer
Identifies the cluster peer to which the alias was registered.
Reason
The reason why the registration was terminated.
Filtering the list
To limit the list of registrations, enter one or more characters in the Filter field and click Filter. Only those
registrations that contain (in any of the displayed fields) the string you entered will be shown.
To return to the full list of registrations, click Reset.

Registration details

The
Registration details
or
Status > Registrations >
registration.
The exact details shown here depend on the device's protocol, and whether the registration is still current.
For example, SIP registrations include the AOR, contact and, if applicable, public GRUU details. H.323
registration details include all of the registered aliases.
Unregistering and blocking devices
Click Unregister to unregister the device. Note that the device may automatically re-register after a period
n
of time, depending on its configuration. To prevent this, you must also use a
such as an Allow List or Deny List.
Click Unregister and block to unregister the device and add the alias to the
n
preventing the device from automatically re-registering. (This option is only available if the Restriction
policy has been set to Deny List.)
Cisco VCS Administrator Guide (X7.1)
page
(Status > Registrations > By
History, then click on the registration name) shows the particulars of a single
Overview and status information
device,
Status > Registrations > By alias
registration restriction policy
Deny List
page, thus
Page 32 of 479

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence x7.1

Table of Contents