Registration History; Registration Details - Cisco TelePresence Administrator's Manual

Grey Headline (continued)
Status

Registration history

The Registration history page lists all the registrations that are no longer current. It lists the most
recent historical registrations since the last restart, up to a maximum of 255.
To view the Registration history page:
•
Status > Registrations > History
The page displays the following information:
Name The H.323 alias or SIP AOR that the device registered.
Clicking on an individual name will take you to the Registrations Details
page for that registration.
E164 For H.323 devices that registered one or more E.164 numbers, the first
will be shown here. For SIP devices this will always be blank because they
cannot register E.164 numbers.
Type Indicates the nature of the registration. This will most commonly be
Endpoint, Gateway, or SIP UA.
Protocol Indicates whether the registration was for a SIP or H.323 device.
Creation Time The date and time at which the registration was accepted.
If an NTP server has not been configured, this will say Time not set.
End Time
The date and time at which the registration was terminated.
Duration The length of time that the registration was in place.
Reason The reason why the registration was terminated.
Filter
To limit the list of registrations, enter one or more characters in the Filter field and click Filter. Only
those registrations that contain (in any of the displayed fields) the string you entered will be shown.
To return to the full list of registrations, click Reset.
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
The Registration details page shows full information about an individual device's registration. The
exact details and options shown here will depend on the device's protocol, whether the registration
is still current, and whether a Deny List is in use.
To view the Registration details page:
•
Status > Registrations > By device, then click on the device's Name or E164 number
•
Status > Registrations > By alias, then click on the device's Alias
•
Status > Registrations > History, then click on the device's Name or E164 number.
Unregister
Click to unregister the device. Note that the device may automatically re-register after a period of
time, depending on its configuration. To prevent this, you must also
Block
Click to add all the aliases for this registration to the Deny List. (This option is only available if a
Deny List has been activated.)
Unregister and block
Click to de-register the device add all the aliases for this registration to the Deny List, thus
preventing the device from automatically re-registering. (This option is only available if a
has been activated.)
The links available in the Related tasks section may include:
Configure the registration Deny List
Click to go to the Registration Deny List page, where you can add entries to the Deny List.
View active calls involving this registration
Click to go to the Calls page, filtered for this particular registration.
View previous calls involving this registration
Click to go to the Call history page, filtered for this particular registration.
Call Bandwidth
processing control
23
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER

Registration details

use an Allow List or Deny
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
List.
Deny List
Appendices