Stripping @Domain For Dialing To H.323 Numbers - Cisco TelePresence Administrator's Manual

Field
Pattern type
Pattern string
Pattern behavior
Replace string
On successful match
Target zone
State
Rule #2
Field
Rule name
Description
Priority
Source
Request must be
authenticated
Mode
Pattern type
Pattern string
Pattern behavior
Replace string
On successful match
Target zone
State

Stripping @domain for dialing to H.323 numbers

SIP endpoints can only make calls in the form of URIs - for example name@domain. If the caller does not
specify a domain when placing the call, the SIP endpoint automatically appends its own domain to the
number that is dialed. So if you dial 123 from a SIP endpoint, the search will be placed for 123@domain. If
the H.323 endpoint being dialed is registered as 123, the VCS will be unable to locate the alias 123@domain
and the call will fail.
If you have a deployment that includes both SIP and H.323 endpoints that register using a number, you will
need to set up the following
place calls from both SIP and H.323 endpoints to H.323 endpoints registered using their H.323 E164 number
only.
Cisco VCS Administrator Guide (X7.1)
Value
Suffix
example.com
Replace
example.co.uk
Continue
Head office
Enabled
Value
Transform to example.net
Transform example.com to example.net
100
Any
No
Alias pattern match
Suffix
example.com
Replace
example.net
Continue
Head office
Enabled
pre-search transform and local zone search rules. Together these will let users
Dial plan and call processing
Page 166 of 479