System Event/Error Log Messages - IBM System x3350 Type 4192 Problem Determination And Service Manual

10. Reconnect all external cables and power cords, and turn on the peripheral
11. Restart the server.

System event/error log messages

The system event/error log can contain messages of three types:
Information
Warning
Error
Each message contains date and time information, and it indicates the source of
the message (POST/BIOS or the service processor).
214
IBM System x3350 Type 4192 and 4193: Problem Determination and Service Guide
4. Move the jumper from pins 1 and 2 to pins 2 and 3 to enable the BIOS
recovery mode.
5. Reinstall the server cover; then, reconnect all power cords.
6. Insert the update diskette, CD, or DVD into the diskette, CD, or DVD drive.
7. Turn on the server and the monitor.
After the update session is completed, remove the diskette, CD, or DVD from
the drive and turn off the server.
8. Disconnect all power cords and external cables; then, remove the server cover.
9. Return the boot block recovery jumper to pins 1 and 2, to return to normal
startup mode.
devices; then, reinstall the server cover.
Information messages do not require action; they record significant
system-level events, such as when the server is started.
Warning messages do not require immediate action; they indicate
possible problems, such as when the recommended maximum
ambient temperature is exceeded.
Error messages might require action; they indicate system errors,
such as when a fan is not detected.
Boot block
recovery (JP4)
Clear CMOS (JP1)