Completing The Setup - IBM System x3350 Type 4192 Problem Determination And Service Manual

4. Click System x3350 to display the matrix of downloadable files for the server.
5. Select the software or firmware package that you want to install. On the next
6. Repeat step 5 until you have downloaded all the files that you need.
7. Follow the instructions in the Remote Supervisor Adapter II readme file that you
8. Restart the server after the software and firmware are installed.

Completing the setup

See the IBM Remote Supervisor Adapter II User's Guide on the IBM System x
Documentation CD for instructions for completing the configuration, including the
following procedures:
v Configuring the Ethernet and serial ports
v Defining login IDs and passwords
v Selecting the events that will receive alert notifications
v Monitoring remote server status using the Remote Supervisor Adapter II SlimLine
v Controlling the server remotely
v Attaching a remote diskette drive, CD drive, or disk image to the server
After you configure the adapter, use the Web-based interface to create a backup
copy of the configuration so that you can restore the configuration if you have to
replace the adapter. For more information, see the Remote Supervisor Adapter II
User's Guide.
44
IBM System x3350 Type 4192 and 4193: Problem Determination and Service Guide
page, click the link for each file that you want to download. Follow the
instructions that are displayed.
downloaded, to install the software and firmware.
Web-based interface