IBM System x3350 Type 4192 Problem Determination And Service Manual page 38

v Event/Error Logs
20
IBM System x3350 Type 4192 and 4193: Problem Determination and Service Guide
- BMC Build Date
This is a nonselectable menu item that displays the BMC firmware build
date.
- BMC Build Level
This is a nonselectable menu item that displays the BMC firmware build
level.
- Existing Event Log Number
This is a nonselectable menu item that displays the number of entries in
the BMC system event log.
- BMC POST Watchdog
Select this choice to enable or disable the BMC POST watchdog. Disabled
is the default setting.
- BMC POST Watchdog Timeout
Select this choice to set the BMC POST watchdog timeout value. 5
minutes is the default setting
- System - BMC Serial Port Sharing
Select this choice to enable or disable sharing of the serial port between
the BMC and the system. Disabled is the default setting; it assigns the
serial port to the BMC exclusively.
- BMC Serial Port Access Mode
If serial port sharing is enabled, select this choice to specify the times and
conditions during which the BMC shares the serial port.
- Reboot System on NMI
Select this choice to enable or disable restarting the system whenever a
nonmaskable interrupt (NMI) occurs. Enabled is the default.
- User Account Settings
Select this choice to define user names and passwords for logging in to the
BMC to remotely control settings on the server.
- BMC Network Configuration
Select this choice to view the BMC MAC address, the BMC IP address and
configure DHCP control.
- BMC System Event Log
Select this choice to view the BMC system event log, which contains
messages about system events, such as the event entry number,
timestamp, sensor type, sensor number, and event description. Select
Clear BMC SELs to clear the BMC system event log.
– High Precision Event Timer
Select this choice to enable or disable the high precision event timer.
Select this choice to view and clear the System Event/Error Log and the Remote
Supervisor Adapter II event/error log.
– System Event/Error Log
Select this choice to view the events and errors that were generated during
POST and by the system management interface (SMI) handler. The most
recent event is displayed first. Use the arrow keys to move among pages in
the log. Select Clear System Logs to clear the system event/error log.
– RSA II Event/Error Log
This choice is available only if an optional Remote Supervisor Adapter II
SlimLine is installed.