IBM System x3350 Type 4192 Problem Determination And Service Manual page 127

CD-RW/DVD
cable connector
Air baffle
Operator information
panel cable connector
Video cable
2. From the front of the server, thread the operator-information-panel ribbon cable
through the panel housing in the server; then, through the opening in the rear
of the panel housing.
3. Slide the ribbon cable into the cable guide on the back of the panel housing.
4. Fold the ribbon cable according to the following illustration.
Operator panel
5. Continue threading the ribbon cable through the cable guides on the bottom of
the chassis; then, route it through the opening in the bulkhead beside fan 3
and connect it to the front panel connector on the system board.
Operator information
panel cable
CD-RW/DVD cable
USB cable
Chapter 4. Removing and replacing server components
Video cable
connector
USB cable
connector
Fan 3
Interposer
card
109