Installing A Microprocessor - IBM System x3350 Type 4192 Problem Determination And Service Manual

5. Open the microprocessor-release lever to the fully open position.
6. Open the microprocessor bracket frame.
7. Carefully remove the microprocessor.
8. If you are instructed to return the microprocessor, follow all packaging

Installing a microprocessor

The following notes describe the type of microprocessor that the server supports
and other information that you must consider when you install a microprocessor.
v The server supports one Intel dual-core or quad-core flip-chip land grid array 775
v Read the documentation that comes with the microprocessor to determine
v The microprocessor uses an integrated voltage regulator on the system board.
Attention:
sure that it is paired with its original heat sink or a new replacement heat sink. Do
not reuse a heat sink from another microprocessor; the thermal grease distribution
might be different and might affect conductivity.
To install a new or replacement microprocessor, complete the following steps:
104
IBM System x3350 Type 4192 and 4193: Problem Determination and Service Guide
Microprocessor-
release lever
instructions, and use any packaging materials for shipping that are supplied to
you.
(FC-LGA 775) microprocessor, which is designed for the LGA 775 socket. The
type, speed, and L2 cache of the microprocessor depend on the server model.
See http://www.ibm.com/servers/eserver/serverproven/compat/us/ for a list of
supported microprocessors.
whether you must update the basic input/output system (BIOS) code. To
download the most current level of BIOS code, complete the following steps:
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click System x.
3. Under Popular links, click Software and device drivers.
4. Click System x3350 to display the matrix of downloadable files for the server.
If you are installing a microprocessor that has been removed, make
Microprocessor
orientation indicator
Microprocessor
Microprocessor
orientation indicator
Microprocessor
connector