IBM System x3350 Type 4192 Problem Determination And Service Manual page 35

Configuration/Setup Utility menu choices
The following choices are on the Configuration/Setup Utility main menu. Depending
on the version of the BIOS code, some menu choices might differ slightly from
these descriptions.
v System Summary
Select this choice to view configuration information, including the amount of
installed memory. When you make configuration changes through other choices
in the Configuration/Setup Utility program, the changes are reflected in the
system summary; you cannot change settings directly in the system summary.
This choice is on the full and limited Configuration/Setup Utility menu.
– Processor Summary
Select this choice to view the processor information, including the type, speed
and cache size of the microprocessor.
v System Information
Select this choice to view information about the server, such as machine
type/model, system serial number, system UUID, system board identifier, and the
system asset tag. You can also view the version, date, and build level of the
BIOS and the ASM Adapter ROM. You cannot change the system information
settings.
This choice is on the full Configuration/Setup Utility menu only.
v Devices and I/O Ports
Select this choice to view or change assignments for devices and input/output
(I/O) ports.
Select this choice to enable or disable Ethernet controllers and all standard ports
(such as serial and USB). Enable is the default setting for all controllers. If you
disable a device, it cannot be configured, and the operating system will not be
able to detect it (this is equivalent to disconnecting the device). If you disable the
integrated Ethernet controllers and no Ethernet adapter is installed, you will have
no Ethernet capability. If you disable the integrated USB controller, the server will
have no USB capability; to maintain USB capability, make sure that Enabled is
selected for USB Controller on the USB Support menu.
If the server is a SATA model, select this choice to determine the programming
interface for the SATA port.
This choice is on the full Configuration/Setup Utility menu only.
– Remote Console Redirection
Select this choice to configure the remote console serial port, enable remote
keyboard redirection, and to set other remote console values.
– USB Support
Select this choice to enable or disable the USB controller and the USB ports.
– Video
Select this choice to view display information about the video controller and
video memory size.
– System MAC Addresses
Select this choice to display the MAC address for the network devices that are
installed in the server.
v Date and Time
Select this choice to set the date and time in the server, in 24-hour format
(hour:minute:second).
This choice is on the full Configuration/Setup Utility menu only.
v System Security
Chapter 2. Configuration information and instructions
17