Updating Ibm Director; Setting Up A Remote Supervisor Adapter Ii Slimline - IBM System x3350 Type 4192 Problem Determination And Service Manual

Updating IBM Director

If you plan to use IBM Director to manage the server, you must check for the latest
applicable IBM Director updates and interim fixes.
To install the IBM Director updates and any other applicable updates and interim
fixes, complete the following steps.
Note: Changes are made periodically to the IBM Web site. the actual procedure
might vary slightly from what is described in this document.
1. Check for the latest version of IBM Director.
2. Install IBM Director.
3. Download and install any applicable updates or interim fixes for the server:

Setting up a Remote Supervisor Adapter II SlimLine

This section describes how to set up, cable, and configure a Remote Supervisor
Adapter II SlimLine for use on an Advanced System Management (ASM) network
so that you can manage the server remotely.
In addition to the information in this section, see the IBM Remote Supervisor
Adapter II User's Guide on the IBM System x Documentation CD for information
about how to configure and use an ASM network to manage the server remotely
through the Web-based interface or the text-based interface.
Note: The Web-based interface and text-based interface do not support
double-byte character set (DBCS) languages.
Requirements
Make sure that you have completed the following procedures before you set up the
Remote Supervisor Adapter II SlimLine:
v Install the operating system, using the ServerGuide program and the
v If you plan to use the remote disk function, install the following software:
v Make sure that the server has an Internet connection, so that you can download
v If you plan to configure Simple Network Management Protocol (SNMP) trap alerts
42
IBM System x3350 Type 4192 and 4193: Problem Determination and Service Guide
a. Go to http://www.ibm.com/systems/management/downloads.html.
b. If the drop-down list shows a newer version of IBM Director than what
comes with the server, follow the instructions on the Web page to download
the latest version.
a. Go to http://www.ibm.com/systems/support/.
b. Under Product Support, click System x.
c. Under Popular links, click Software and device drivers.
d. Click IBM System x3350 to display the matrix of downloadable files for the
server.
documentation that comes with the operating system.
– On the server, install Microsoft Windows 2000 with Service Pack 3 or later.
– On the client system, install Microsoft Windows 2000 or later and the Java 1.4
or later Plug-in.
software and firmware from the IBM support Web site during the installation
process.
on the Remote Supervisor Adapter II SlimLine, install and compile the
management information base (MIB) on the SNMP manager. The Remote
Supervisor Adapter II SlimLine firmware, the integrated service processor