Installing Applications - Kyocera Mita TASKalfa 250ci Operation Manual

Installing Applications

You can install new applications.
Use the procedure below to install an application.
Application
Manage the applications.
Name Version Status
Application 1 --- Activating
Application 2 --- Stopped
Application 3 --- Activating
Print
Report
Status
Application - Add
Insert the removable memory and select the application to be installed.
more applications can be installed.
Name Version Type/Result of Installation
Application 1 Activating Succeeded
Application 2 Activating Succeeded
Application 3 Activating Succeeded
Status
OPERATION GUIDE
License
Add
Official
Delete
Official
Trial 1/1
License
On
License
Off
Detail
Close
10/10/2008 10:10
1/1
Remove
Memory
Install
Detail
Close
10/10/2008 10:10
Default Setting (System Menu)
1
Insert the USB memory containing the application
to be installed into the USB memory slot (A1).
2
Press the System Menu key.
3
Press [ ] and then [Application].
NOTE:
If user login administration is disabled, the
user authentication screen appears. Enter your login
user name and password and then press [Login]. For
this, you need to log in with administrator privileges.
Refer to Adding a User on page 11-4 for the default
login user name and password.
4
Press [Add].
5
Select the application to be installed and press
[Install].
You can view detailed information on the selected
application by pressing [Detail].
6
When the confirmation screen appears, press
[Yes].
Installation of the application begins. Depending on
the application being installed, the installation may
take some time.
8
8-83